This is currently a work in progress. Nothing is 100% final yet but here is what I can tell you. This is a true 250mm(motor center to motor center measured diagonally) size quadcopter swinging 6×45 props. As far as I can find there are very few true 250mm size quads capable of swinging 6″ props. The flight controller is running cleanflight and the afro esc’s are running blheli with one shot enabled. FPV gear is a 200mw 5.8ghz tx + 110 degree 700tvl camera bundle from Eachine.
At this point the battery is going to be mounted under the frame. Originally I had thoughts of mounting it on top which would put it over the flight controller, ubec, etc. Mounting under will give me a nice flat area to mount velcro to and strap down the battery.
- Afro 20A ESC’s
- FPVMODEL MC2204 2300KV Brushless Motor
- Gemfan 6×45 props
- HobbyWing UBEC-3A (2-6S)
- Turnigy 1800mah 4s 65~130c lipo battery
- CC3D Atom Mini Flight Controller
- FrSky D4R-II Receiver
- FPV tx/camera