This build is to inspire my son as Dusty from the movie Planes is one of he favorite characters. We built it from scratch using the plans from Flite Test. Plans were great, the only thing I should have payed more attention to was the wing and how they put it together. I think it […]
Category: Projects
FrSky FLD-02 holder for Turnigy 9X
I designed this 3d printable part to take advantage of the old antenna location on my Turnigy 9x radio. I like having the smaller FrSky telemetry screen as then I do not need to mess about with switching screens on the 9x radio when I want to see telemetry info. To mount the FrSky FLD-02 […]
Adjustable and Fixed Width Marking Gauge
This is one of my latest 3d printable designs. Its a marking gauge used in wood working. This one features both fixed marking beams set to 6mm, 12mm, 20mm and 24mm as well as a single point marking beam. The face plate has two holes so if you use two of the single point marking […]
Steampunk Aquarium
This is another older project. The one thing I failed to do at the time was properly research the materials used in the tank. Specifically the brass tubing used for the air line. Brass will leach metals into the water and kill any fish and/or plants. Lucky for me I found this out before putting […]
Entertainment Center
This project is about 8 years old at this point. At the time this was a fairly large build and it was built in place. It is a full eight feet long and I want to say about seven or eight feet tall. I actually still use this as our main entertainment center. It was […]
Intervalometer
This is an older project that I re-added to the site for any one who is interested. The really interesting thing about this was the lack of RTC. As I remember it used a general timer and would auto correct for variances by adding or subtracting time from the next run. As I remember the […]
Custom Lego Minifigure and Hot Wheels Shadowbox
After looking around for a shadow box deep enough to hold our simpsons lego minifigures and simpsons hot wheels cars I had to make my own. Most shadow boxes are not deep enough to handle the cars and some of the minifigures. The build is very simple in that its pine and for the joints […]
New Year, New Gear, New Mods!
So the holidays have come and gone. That means I have some new gear for this years RC flying season. It also means I have already ran into an issue and fixed it with a simple mod. The issue that I ran into is that my new FrSky XJT module did not fit correctly in […]
1/2A Stealth Sport
Come check out this small RC plane build.