Give it a try next time you need to mark out some segments on a circle. It looks to be quick and easy but more importantly has an explanation of the math at the end.
I’m planing on running mine at less than 200 watts probably 100 watts max. If you want to run this at the full 200 watts I would suggest getting a wider heat sink. The DC to DC boost converter has adjustments for both voltage and amperage so this gives you a great deal of control […]
This was inspired by the Slopes go pro mount thing. This is for those of us who use the Yi camera rather than the go pro. Anglez is a simple design with different angles (10, 30, 40 and 45) to sit your YI camera. Lots of ways to sit the camera in for positive or negative angles.
I found this MOC online to add to my Halloween display and made a few changes to it. If any one wants me to try and make instructions for this shoot me a message and let me know. Credit for the original design goes to gcanik on the eurobricks forum.
About This is currently a work in progress. Nothing is 100% final yet but here is what I can tell you. This is a true 250mm(motor center to motor center measured diagonally) size quadcopter swinging 6×45 props. As far as I can find there are very few true 250mm size quads capable of swinging 6″ […]
I picked up an 18″ weather proof case from MCM Electronics the other day to use for my transmitters. They both fit great and I have enough room in the case for my FPV goggles as well. The interior has three layers of foam. The top layer in the lid is egg crate style foam, then […]